A Integrated Compressed Air Solution
Nitrogen flow rate:10-2000Nm³/h
Nitrogen purity:>99.999~99.997%
Nitrogen pressure: 0.1-0.7Mpa( adjustable )
Dew point: -60'
COxygen content:<3-10ppm
Hydrogen content:<1000ppm
Products Features：
This series of unit adopts catalytic deoxidation + adsorption drying method to remove impurities such asoxygen, water, carbon dioxide and dust from nitrogen to obtain high purity nitrogen. Nitrogen (99-99.99%)and hydrogen are mixed statically and then enter the heat exchanger to preheat the inlet gas by using the heat from the outlet of the deoxidation tower, and then enter the deoxidation tower equipped with high-efficiency hydrode oxygenation catalyst, and the oxygen impurity in the nitrogen reacts with the hydrogen to produce water to be removed, and at the same time, a large amount of heat is released, and the exothermic heat is about 200'c when the reaction occurs with 196 of the oxygen content. Then it passes through the heat exchanger and enters the filter drier device to remove impurities such as water, carbon dioxide and dust particles, so as to obtain high purity nitrogen.
This series of device is equipped with automatic fault alarm and shutdown function system:room temperature deoxygenation, no need for pre-treatment before use, no longer need to regenerate in use, good anti-poisoning performance for sulfide, chloride, ammonia, etc. life expectancy of more than 5 years: low water content in the product gas, the atmospheric dew point of-60 'c; generally pure gas containing hydrogen < 1000ppm (automatic hydrogenation),the oxygen content of< 3ppm.
* Please feel free to contact us, we will reply you within 24 hours.
